What are the components called
When you are contacting us about your EcoPro or EcoPro Compact please see below for the component part names.
All articles
Fitting
Fitting your EcoPro and EcoPro Compact
How do you fit the EcoPro and EcoPro Compact
The TAPP EcoPro just takes a minute to install following the instructions below. If you get any difficulty please just check these FAQs or send an image or video of the issue you experience to +356 99866142. You mixer is a shower type or "a bit diffe
I need an adapter for my mixer
To check what type of adapter you need please use the following diagram and order your adapter at https://tappwater.mt/products/adapters. If you need help with how to size the aerator please see this article and video.
How do i find out what size aerator I have
To correctly find the right size of aerator for your kitchen mixer you can use coins. The coins are placed ontop of the aerator on the side with threads. This video demonstrates for you. This article may also be of help.
Troubleshooting a leak when fitting your TAPP
If you TAPP fitting has a leak from the kitchen mixer after fitting the most likely cause is a missing washer in between the adapter and the kitchen mixer. The washer is not always needed, but if your fitting has a leak then adding the washer in most
Can I get help with fitting?
If you have encountered difficulty when fitting please send a picture of your mixer or a video describing the issue and we can help you resolve the problem. Contact us by WhatsApp on +356 99866142 or use the live chat option. We do not provide a fitt
Water is slow from filtered side
It is customary to use a pump to increase pressure on water in the household and this can affect the way your water filter works. Pumps are activated by a pressure switch, so on some occasions the filtered side does not create enough pressure to acti
A collection of more complex mixers that we have found fitting solutions for
Here we will collect a range of mixers that we have provided solutions for. These are all mixers that we see in Malta for which we have provided a workable solution. Problem:. The mixer is a standard M22 fitting so the TAPP screws directly on. Howeve
My aerator or adapter is broken or jammed in the tap - now what?
If you aerator is broken or your adapter is stuck inside the tap, or your TAPP the following images show the angle to use a tool to remove it. Instead of gripping around the aerator/adapter you can get more grip by approaching from underneath and gri